• Home
  • AquaRite S3 Omni Salt System 25,000 gallon
Image for AquaRite S3 Omni Salt System 25,000 gallon from Hayward Residential and Commercial Pool Products

Other Views

  • Image for AquaRite S3 Omni Salt System 25,000 gallon from Hayward Residential and Commercial Pool Products
  • Image for AquaRite S3 Omni Salt System 25,000 gallon from Hayward Residential and Commercial Pool Products
  • Image for AquaRite S3 Omni Salt System 25,000 gallon from Hayward Residential and Commercial Pool Products
  • Image for AquaRite S3 Omni Salt System 25,000 gallon from Hayward Residential and Commercial Pool Products
  • Image for AquaRite S3 Omni Salt System 25,000 gallon from Hayward Residential and Commercial Pool Products
  • Image for AquaRite S3 Omni Salt System 25,000 gallon from Hayward Residential and Commercial Pool Products
AquaRite S3 Omni Salt System 25,000 gallon Item #AQRS325OMNI
Product Description
NSF 50 Compliant Pool Products

AquaRite® S3 delivers superior salt chlorination with built-in pool control. With two model options and easy-to-add accessories, AquaRite S3 is more than superior salt chlorination—it’s advanced sanitization and automation that grows with any pool.

  • Automatically converts salt to chlorine and cuts chlorine costs by up to 50%
  • Creates softer, silkier water that won't irritate eyes, dry out skin or cause fabrics to fade


AquaRite S3 Omni:

  • For in-ground pools. Available in two sizes 25,000 and 40,000 gallons
  • Superior salt chlorination plus full control of virtually any pool or spa feature via the external control panel, the mobile app and voice control devices including Amazon® Alexa® and Google Home®
  • Gain full access and total control over your pool and spa equipment from anywhere via the intuitive OmniLogic® app
  • Clear TurboCell S3 Salt Cell for easy inspection
  • Operates over a broad range of salt levels, 800-8000 ppm
  • Pool cover detect capabilities
  • Easier installation with auto voltage select
  • Expand at any time with easy-to-add accessories sold separately - from smart relays to pH sensing to WiFi connectivity and more

NOTE: AQRS3 / AQRS3Omni NSF approved. Omni functionality not evaluated by NSF.

3-year limited warranty: When sold by a Totally Hayward® partner. Exclusions, other terms and conditions may apply--visit hayward.com/expert for details.

Expert Line® products are only available through your local pool professional.

Google Home® is a trademark of Google, LLC, Amazon® and Alexa® are trademarks of Amazon Technologies, Inc. Neither of these companies are affiliated with Hayward Industries, Inc. nor endorse this product.

Select 2-4 items to Compare
Compare
Ctn. Weight
24 lbs.
Ctn. Qty.
1

Brochures

Accessories

TurboCell S3 Salt Cell, 15,000 gallons (Expert Line)

Item #TCELLS315

TurboCell® Salt Chlorination Cells automatically convert pool salt into chlorine while providing in-ground pools with consistent sanitization. Experience the silky soft water that won't irritate eyes, dry out skin or cause fabrics to fade.

TurboCell S3 Salt Cell, 25,000 gallons (Expert Line)

Item #TCELLS325

TurboCell® Salt Chlorination Cells automatically convert pool salt into chlorine while providing in-ground pools with consistent sanitization. Experience the silky soft water that won't irritate eyes, dry out skin or cause fabrics to fade.

TurboCell S3 Salt Cell, 40,000 gallons (Expert Line)

Item #TCELLS340

TurboCell® Salt Chlorination Cells automatically convert pool salt into chlorine while providing in-ground pools with consistent sanitization. Experience the silky soft water that won't irritate eyes, dry out skin or cause fabrics to fade.

TurboCell S3 Salt Cell for 40,000 gallons, 25-ft. Cord (Expert Line)

Item #TCELLS340X25

TurboCell® Salt Chlorination Cells automatically convert pool salt into chlorine while providing in-ground pools with consistent sanitization. Experience the silky soft water that won't irritate eyes, dry out skin or cause fabrics to fade.

Omni® RS485 Smart Relay

Item #HLH485RELAY

Omni smart relay kit, includes 1 smart relay, J-Box, and 6' whip, 3-year warranty

Sense and Dispense

Item #HL-CHEM

Sense & Dispense monitors residential pools to maintain balanced water, without the hassle. A continuous sensing module for pH and sanitization (ORP) levels with the ability to dispense chlorine when paired with a chlorination system.

Valve Actuator, 24V, .75A, 15 ft. cable

Item #GVA-24

Valve Actuators

OmniLogic® Spa Side Remote

Item #HLSPASIDE

The Spaside remote is an ideal addition to spa builds or renovations. Designed to blend in with the environment, it provides users the ability to simply adjust settings such as the temperature, switch between modes, turn on the lights, all from the spa!

OmniLogic® Wireless Waterproof Remote

Item #HLWIRELESS

Remote Controls - Wireless

OmniHub Converter Board

Item #HLPMPCONV

Replacement Parts

AquaRite® S3 Salt Chlorination System

AQRS325OMNI   AquaRite S3 Omni Salt System 25,000 gallon Replacement Parts


AquaRite S3 Support

AquaRite S3 Firmware
Omni Firmware

AquaRite S3 Firmware


To upgrade the AquaRite S3, please follow the instructions detailed in the owners manual under the section “Firmware Upgrade”. Note this is on page 21 of manual 092769-Rev B which can also be found below under "Release Notes" and as an excerpt here:

The AquaRite S3’s firmware is the basic operating system that runs the unit. Note that there are two separate firmware versions and files for the AquaRite S3 unit; one for the LCD Display and one for the main PCBA. The AquaRite S3 was shipped with the version of firmware that was available at the time of release. There may be a newer version available and if so, we encourage you to upgrade. To check the versions of firmware on the AquaRite S3, please follow the following steps:

  1. At the home screen, Press “OK”
  2. Navigate to:
    1. “System Settings”
    2. “System info”
    3. “Display” or “Main Board”
  3. The version of Firmware will be the first line below “Version”

Hardware Version Release Date Release Notes Download
AQR S3 Main R4.4.2 11/08/2022 Adobe Acrobat file View
95 KB
AQR S3 Display R4.4.2 11/08/2022 Adobe Acrobat file View
144 KB

  • In order to install firmware, installation files must be on the root directory of the USB drive.


  • It is best if you download the firmware in Chrome, Firefox or Safari browsers. If you download in Internet Explorer, once your download is complete, please remove the ".TXT" extension from the file on the USB device.

Omni Firmware

Below you will find the latest Hayward OmniLogic Controls Firmware updates available. Please locate the Hardware that you would like to update and download the latest Firmware onto your USB memory stick. You will need to bring the USB memory stick to the Omni Control product. For OmniLogic simply plug it into the side of the Local Display behind the Dead Front and for OmniHub you will need to access the port on the bottom of the display. Next, you will need to access service mode through the power button on the bottom left corner of the main screen and from the next menu find the upgrade button, then pick the component or remote that you are upgrading. The Omni controllers will automatically reboot after the upgrade is complete. We suggest you consult your pool professional when upgrading OmniLogic firmware.



Hardware Version Release Date Release Notes Download
MSP
(Main System Processor)
R4.7.0 11/28/2022 Adobe Acrobat file View
6.3 MB

Previous Version
WDT
Unified OmniLogic Remote (Wired And Wireless Remote)
R4.7.0 11/28/2022 Adobe Acrobat file View
5 MB
EPG
(OmniLogic Expansion Panel)
R4.7.0 11/28/2022 Adobe Acrobat file View
3.1 MB
MPP
(Main Panel Processor / Main Board)
(This version not for use in Australia)
R3.2.0 12/19/2019 Adobe Acrobat file View
81 KB

Previous Version
AQRS3
(Main module upgrade from Omni)
R4.4.2 11/08/2022 Adobe Acrobat file View
95 KB
AQRS3
(Expansion Module upgrade from Omni)
R4.1.0 11/08/2022 Adobe Acrobat file View
41 KB
Smart Relay R3.0.0 01/14/2019 Adobe Acrobat file View
73.66 KB
Spa Side Remote R3.2.0 12/19/2019 Adobe Acrobat file View
67 KB

  • In order to install firmware, installation files must be on the root directory of the USB drive.


  • It is best if you download the firmware in Chrome, Firefox or Safari browsers. If you download in Internet Explorer, once your download is complete, please remove the ".TXT" extension from the file on the USB device.


Do you need help with saving installation files onto a USB drive?

Videos

AquaRite S3 Salt Chlorination System
With its built-in control, AquaRite® S3 from Hayward® effortlessly manages chlorine levels, a pump and heater.