;)
Pro Logic®
ITEM # PROLOGIC
Description
Create your own automation and chlorination system with Pro Logic. Whether you have a basic pool or an extensive backyard paradise, Pro Logic always offers the right level of control for your environment – because you start with the ultimate control then Pick N’ Mix™ the options that are right for you. And it can easily be modified again and again, as your environment changes. There are six Pro Logic models to choose from. See the Pick N’ Mix accessories to create a custom controller that’s right for you.
Automate your backyard and save you up to 70% on your pool’s energy costs. Automating your variable-speed pump can save you up to $1,200 a year - maximizing water flow while minimizing energy consumption, so both you and your energy bill can relax.
Models
Accessories
Upgrades
Frequently Asked Questions
Can I install the Pro Logic™ myself?
The Pro Logic™ is a large, multifunction, high voltage control system. For safety reasons, it is very important that the Pro Logic™ be installed per NEC and local electrical codes. In addition, the Pro Logic™ must be configured (programmed) to control the particular equipment on your pool. Goldline Controls® highly recommends that the Pro Logic be installed by a licensed professional.
Will the Pro Logic™ work with my solar pool heating system?
Yes, the Pro Logic™ can control solar heating systems that utilize either a valve (you will need to purchase a valve actuator) or a booster pump. Individual temperature settings can be programmed for the pool and spa. In addition, the Pro Logic™ can be configured with advanced solar control features such as "solar extend" that will keep the filter pump running at the end of the normal filtration time if solar heat is still available; and "solar priority" that will automatically disable the conventional heater(s) when solar is available in order to ensure that solar handles the majority of the heating load.
Can I control my pool heaters?
The PL-P-4 model can control a single conventional heater (gas or heatpump). The PL-PS-x models can all control up to 2 conventional heaters. All Pro Logic™ systems can also be programmed to control a solar pool heating system in addition to the conventional heaters.
The Pro Logic™ can be programmed for separate pool and spa temperatures for each heater. Also each heater can be programmed "OFF". A typical use for these feature might be a pool/spa combination system where the gas heater is used to rapidly heat the spa (the gas heater is programmed "OFF" for pool operation) while the heatpump is used to economically heat the pool (the heatpump is programmed "OFF" for spa operation). The Pro Logic™ is designed with flexibility to allow you to control your pool/spa almost any way you can imagine.
The programable "heater cooldown" function will keep the filter pump running for a short period after the heater(s) turn on to allow the heater core to cool down to air temperature.
For pools that are being heated by heatpumps, the Pro Logic™ can be programmed with the "heater extend" feature that will keep the filter pump running past its normal turn-off time if the pool is not up the desired temperature. This will keep the heatpump working as long as is required in order to heat the pool.
Brochures
|
Automation (LITAUTOB11) |
|
|
Sense and Dispense® Chemistry Automation (LITSD11) |
|
|
Wireless and Wired Remote Controls Automation Controls (LITREMOTEB11) |
|
|
Hayward Energy Solutions® (LITESB10) |
Manuals
Applications
- Any pool or pool/spa combination
- Single or dual equipment
Parts
|
|
Pro Logic® |