Change Your Font Size:

Sand Filter Parts

ITEM #  I_PFSAND

Description

The oldest and most popular method of filtration is sand. Sand filters share two things in common: 1) When in the filtration mode, water always flows from top to bottom; 2) They all have some sort of lateral or under drain with slots to hold back sand while allowing clean, filtered water to pass through. High-rate sand filters use a special filter sand, normally .45 to .55mm (also known as pool-grade #20 silica sand), because it has sharp edges that serve to separate particles, allowing filtration to take place. They operate on the basis of 'depth' filtration; dirt is driven through the sand bed and trapped in the minute spaces between the particle of sand. Initially, a clean sand bed will remove larger particles, and then, as the bed starts to load up, it will remove finer particles. Cleaning of the media, or sand bed, is accomplished through reversing the flow through the filter, to the 'waste' line. This is known as backwashing.

Models

Model Number Description Ctn. Qty. Ctn. Weight  
GMX142DA3 Nipple 25 3.0 lbs.
GMX142Z15 1-1/4 In X 24 In Ablex Hose 5 1.9 lbs.
GMX142Z4 Vinyl Hose Bushing 250 7.0 lbs.
GMX142Z8 Carriage Bolt 200 6.5 lbs.
GMX142Z9 Washer 100 1.0 lbs.
GMX152DA Lateral Assy W/Center Pipe 1 2.9 lbs.
GMX152F Standpipe 10 2.9 lbs.
GMX152Z11 Screw 50 1.2 lbs.
GMX152Z15 1 1/2 In X 27 In Abl 10 5.4 lbs.
GMX152Z4A Tank Drain Plug W/O-Ring 200 5.6 lbs.
GMX400F O Ring 200 13.7 lbs.
GMX400K Valve Clamp 20 6.7 lbs.
GMX600F Valve O-Ring 100 6.0 lbs.
GMX600N Valve Clamp 10 10.0 lbs.
GMX600NM Valve Clamp For Pro-Series 20 9.0 lbs.
GMX600NS Valve Clamp For Pro-Series 20 10.0 lbs.
GMX600P O Ring 1000 1.0 lbs.
S200KT Dome wrench for S200 filters 10 3.6 lbs.
SWX196AA1 19In Filter Body W/Skirt -Tiel 1 22.6 lbs.
SWX196DA2 Lateral Assy W/Center Pipe 1 2.1 lbs.

Previous Next

Accessories

Upgrades

Frequently Asked Questions

Brochures

Manuals

Applications